Hi Guru's
I have been trying to set up my HSC interrupt (HSC:0/HPI)to trigger a counter in my ladder logic. I read the manual like 5 times and I still cant seem to know what i am doing wrong. the accumulator is set at 1024 counts and the frequency at the input is 10000hz. I have set the PFN to 3 where my ladder logic is. on the next rung i set HSC:0/HPM to trigger a counter.
Could some one help me out please.
p.s i have attached my HSC config and my ladder logic.
I have been trying to set up my HSC interrupt (HSC:0/HPI)to trigger a counter in my ladder logic. I read the manual like 5 times and I still cant seem to know what i am doing wrong. the accumulator is set at 1024 counts and the frequency at the input is 10000hz. I have set the PFN to 3 where my ladder logic is. on the next rung i set HSC:0/HPM to trigger a counter.
Could some one help me out please.
p.s i have attached my HSC config and my ladder logic.