YoungWint
Member
Hi All
I am trying to read data from one Compactlogix to another Compactlogix.
One is a 1769 L35E and the second a 1769 L32E. I have set up arrays in each PLC, names are different to reflect one is transmitting one is receiving. The L35E is to read from the L32E.
I have selected Mesaage type of 'CIP Data Table Read'.
Communication Path is L35E: LocalEnb,2,192.168.61.145,1,0
I am using a timer, set to 10 secs, and every 10 seconds (on the DN) enabling the MSG. I get a permanent error message 16#00ff (extended 16#000_2107).
Can't get the instruction to work and can't quite see what I have done wrong as all seems correct to me. !!!
Any advice would be greatly appreciated.
I am trying to read data from one Compactlogix to another Compactlogix.
One is a 1769 L35E and the second a 1769 L32E. I have set up arrays in each PLC, names are different to reflect one is transmitting one is receiving. The L35E is to read from the L32E.
I have selected Mesaage type of 'CIP Data Table Read'.
Communication Path is L35E: LocalEnb,2,192.168.61.145,1,0
I am using a timer, set to 10 secs, and every 10 seconds (on the DN) enabling the MSG. I get a permanent error message 16#00ff (extended 16#000_2107).
Can't get the instruction to work and can't quite see what I have done wrong as all seems correct to me. !!!
Any advice would be greatly appreciated.