PLC Pie Guy
Member
Folks.
I have used 9300-ENA and 1783-NATR modules for PLC to plant network connections. PLC to PLC connections and the like.
I'm thinking it should work, but I'm wondering about using the NATR simply to look at 2 PanelViews via VNC.
I have a large oven with 3 PVP1000 aboard, 2 of them are on the machine network. Rather than move them over to the plant network, which would involve running cables and modifying the application slightly, could I simply put the NATR module somewhere on my machine network and translate 2 of the machine IPs to Plant IPs? I'm thinking if I were to set the private port IP as the gateway address for the PVP1000 it should work........ Maybe
Thanks for any input given.
I have used 9300-ENA and 1783-NATR modules for PLC to plant network connections. PLC to PLC connections and the like.
I'm thinking it should work, but I'm wondering about using the NATR simply to look at 2 PanelViews via VNC.
I have a large oven with 3 PVP1000 aboard, 2 of them are on the machine network. Rather than move them over to the plant network, which would involve running cables and modifying the application slightly, could I simply put the NATR module somewhere on my machine network and translate 2 of the machine IPs to Plant IPs? I'm thinking if I were to set the private port IP as the gateway address for the PVP1000 it should work........ Maybe
Thanks for any input given.