MitsM83
Member
I have little to no experience with Omron. A co-worker is trying to set up a MAD42 Analog I/0 card with a CJ1M CPU 11 on a little trainer unit. He wants to bring in a Pot value and display it on a 7 segment display. I was asked to help. It is in "slot" 2. The input is working. Using input 2 and output 2. I am getting the pot value into CIO2005 and using a MOV command to CIO2002 but I get no voltage to the Output. What am I doing wrong? Even if I force a value into that word I get no output.