Operator Panel support Ethernet/Ip and IP67

[huynt]

Dear all.
Do you know Operator Panel Support Ethernet/IP and IP67?. I use Operator Panel with Controllogix for ShipLoading oil in Oil Terminal!

 

[huynt]

Operator Panel of thirdparty Support DH485

Dear all.
Do you know Operator panel support DH485 connect with SLC5/03.
I need info Operator panel support this SLC. Operator same as DTAM Micro of Allen Bradley!
Thank all!

 

[mgvol]

You can still get the DTAM Micro from Spectrum Controls.

http://www.spectrumcontrols.com/soi.htm

 

[huynt]

Dear mgvol!
Do you know other company have Operator Panel with IP67?
Thank you!

 

[mgvol]

Not off-hand, but maybe you should look at Total Control Products. I think they offered one many years ago.

 

[JesperMP]

Are you sure that the DTAM is IP67 ?
I have a spec that says "NEMA 4", and I believe that it corresponds to IP65. (I may be wrong - not an expert on NEMA ratings).

If IP65 is enough, then I know several panels that have that level.

 

[MrQ]

If IP 66 is enough, have a look at:

http://hmi.beijerelectronics.com/web/web_electronics.nsf/AllDocuments/DC8723906008E953C1256EBC0029820E