Ken Moore
Lifetime Supporting Member
I know some of the board members have experience in the waste water treatment field.
I have an application where I need a conveyor to transfer sludge from one system to another. The conveyor needs to be about 17 feet long and around 6 feet wide, speed of about 10/12 feet per minute. The purpose of the conveyor is to allow excess water to drain between stations, so conveyor will have to have a belt and base that allows water drainage. An off the shelf solution would be ideal, but custom built is okay too. At the moment I'm just looking for a referral.
Prefer a vendor in the South Eastern U.S., but open to other locations as well.
thanks,
Ken
I have an application where I need a conveyor to transfer sludge from one system to another. The conveyor needs to be about 17 feet long and around 6 feet wide, speed of about 10/12 feet per minute. The purpose of the conveyor is to allow excess water to drain between stations, so conveyor will have to have a belt and base that allows water drainage. An off the shelf solution would be ideal, but custom built is okay too. At the moment I'm just looking for a referral.
Prefer a vendor in the South Eastern U.S., but open to other locations as well.
thanks,
Ken