I am trying to communicate between a Panelview 550 and an SLC 5/03 processor with a 2711-NC13 Cable.
The original Panleview failed (2711-K5A2) and we replaced it with a 2711-K5A5 (that we had available here), FRN 1.07 and the processor is an SLC5/03 - OS302.
I have changed Channel 0 - System to DH485 using RS Logix in the PLC program and changed to the correct catalog and revision number for the Panelview with Panelbuilder, however I cannot communicate between them.
The RS232 light is illuminated on the PLC, the PLC node is 5 and the panelview node is 6.
Any help on the above would be much appreciated? Please let me know if I have missed any information that would help?
Thanks
The original Panleview failed (2711-K5A2) and we replaced it with a 2711-K5A5 (that we had available here), FRN 1.07 and the processor is an SLC5/03 - OS302.
I have changed Channel 0 - System to DH485 using RS Logix in the PLC program and changed to the correct catalog and revision number for the Panelview with Panelbuilder, however I cannot communicate between them.
The RS232 light is illuminated on the PLC, the PLC node is 5 and the panelview node is 6.
Any help on the above would be much appreciated? Please let me know if I have missed any information that would help?
Thanks