I have a panelview currently using divicenet going through an AIC. I have no copy of the currently running program since the change to divicenet. I have tried to go online with the panelview with no success. Can someone help me to upload the running program and communication configuration for this panelview.
This is what I have
Panelview db9->AIC db9 (the round db9 is open)
AIC RS485 phoenix plug->SLC 505 Devicenet Scanner module
I have tried to use the extra RS232 on the panelview as well as the round db9 on the AIC module with no luck. I am unsure of the transfer type when trying to upload the file to my laptop. The selections are: DF1 point to point--RSLinxAB_DF1-1, DF1 point to point--internal COM1, DF1 point to point--internal COM3, RSlinx network, Remote I/O pass-through.
Any help is appreciated.
Ken
This is what I have
Panelview db9->AIC db9 (the round db9 is open)
AIC RS485 phoenix plug->SLC 505 Devicenet Scanner module
I have tried to use the extra RS232 on the panelview as well as the round db9 on the AIC module with no luck. I am unsure of the transfer type when trying to upload the file to my laptop. The selections are: DF1 point to point--RSLinxAB_DF1-1, DF1 point to point--internal COM1, DF1 point to point--internal COM3, RSlinx network, Remote I/O pass-through.
Any help is appreciated.
Ken