Shawn Cassidy
Member
OP
Thanks.
I really appreciate your help. I think this might solve my problem.
I really appreciate your help. I think this might solve my problem.
Shawn Cassidy said:Hi,
I'm working on a Panelview Plus 700 and I've run into a problem downloading the runtime program to the PV+. I've connected my PC to the screen using a standard Ethernet cable. When I click on the "communications" tab I see the RSLinx Enterprise tree. It shows my Ethernet connection and it is browsing. For some reason I am unable to upload or download to the PV+. In the "application" tree there is an area in the project for RSLinx Enterprise, communication setup. I click on the target and it opens the RSLinx tree that shows my Ethernet connection and specifically the PV+ and it's IP address. How do I set-up the driver on the PV+ to match? I had a friend download some changes I made a few days ago and he had serious problem establishing a connection to download. He finally was able to, but I since attempted again with no luck. Is anyone else having similar issues? I'm using RSView ME 4.00 (CPR7) to do the modifications. Also, I'm having another issue with doing backups. Sometime when I try and do a file backup I get a warning telling me to close the current project before trying to save?? It is closed. Strange stuff. Any help would be much appreciated. Can I just save the archived file or will this be useless to open on another PC?
On installation of RSView or RsLinx it will ask you if you want to install RSview Enterprise communications, I had the same problem until I re-installed the software.Shawn Cassidy said:I'm running RSLinx Classic 2.50. How do you see the version of RSLinx Enterprise??? I can't find it my programs tree? Shouldn't it be in the Rockwell Software folder? Does it use RSLinx Classic to do the communications?