MoraleC2
Member
I have a project that was using PlantPAx version 3.0 and I upgraded it to 3.5. I updated global objects, faceplate graphics, the new PNG images, PLC AOIs, etc.
While my screen objects can read values from AOI instances, all of them are showing errors for at least one multistate indicator (see attached image), and I cannot for the life of me figure out why. Needless to say, this issue was not present before the update.
I have checked the expressions for the multistate indicator connections, and they are only addressing existing members of the AOIs. I verified that all images exist in the project. Is there anything else I can check to troubleshoot this issue further?
While my screen objects can read values from AOI instances, all of them are showing errors for at least one multistate indicator (see attached image), and I cannot for the life of me figure out why. Needless to say, this issue was not present before the update.
I have checked the expressions for the multistate indicator connections, and they are only addressing existing members of the AOIs. I verified that all images exist in the project. Is there anything else I can check to troubleshoot this issue further?
Last edited: