fpap
Member
It is really odd, if I set the backplane dip switch as 2-slot addressing, and configure in RSLogix 5000 the ASB Size as 3/4-Rack (6 I/O Groups) accordingly, I can activate the digital outputs. But when I change back to 1-slot addressing and fullrack size, I can't activate the outputs anymore. Moreover, with 2-slot addressing, the Active led of the ASB module is turned on (or blinking if I disconnect the communication wires), but with 1-slot addressing all three leds are always turned off. I can't understand why it only works with 2-slot addressing setting...