stattiktricity
Member
Hello,
I have the PLX setup and configured. Its seen and downloaded to. However my ML1500 does not communicate over it. The port (0) is used to program and for the HMI (which is a red lion gl something or other) only. The side port pn the ML( port 1) is used to commmand a drive. I have the machine down due to the ENI allen bradley converter crapped out on me. What am I missing with this PLX51-DF1-ENI?? Had anyone used and configured one from ethernet to ML1500 uding "bridge" on the PLX?
I have the PLX setup and configured. Its seen and downloaded to. However my ML1500 does not communicate over it. The port (0) is used to program and for the HMI (which is a red lion gl something or other) only. The side port pn the ML( port 1) is used to commmand a drive. I have the machine down due to the ENI allen bradley converter crapped out on me. What am I missing with this PLX51-DF1-ENI?? Had anyone used and configured one from ethernet to ML1500 uding "bridge" on the PLX?