Barry Kirk
Lifetime Supporting Member
I've got some code running on a Compact Logix/Control Logix using CIP Generic Message instructions.
Service Type is Custom
Service Code is 45 Hex
Instance is 1
Class is 68 Hex
Attribute is 6a Hex
I need to port this code over to some PLC 5/80E's. Series E Rev D.2
I have 50 of the PLC 5/80E's. I've been told that if I upgrade the firmware at $2,000 each or $100,000 to the latest version, I can make this code work.
Is there any other way of getting this to work without upgrading the firmware.
Service Type is Custom
Service Code is 45 Hex
Instance is 1
Class is 68 Hex
Attribute is 6a Hex
I need to port this code over to some PLC 5/80E's. Series E Rev D.2
I have 50 of the PLC 5/80E's. I've been told that if I upgrade the firmware at $2,000 each or $100,000 to the latest version, I can make this code work.
Is there any other way of getting this to work without upgrading the firmware.