Hello friends,
I am trying to establish communication from Concept PLC to Vijeo Designer (version 5) via a TSXCUSBMBP in a MODBUS PLUS loop.
When I connecting my laptop to the loop , ie TSXCUSBMBP usb cable to the laptop, I am able to see the Modbus plus loop is alive. But when connecting to Magelis HMI , the Modbus plus loop is In Active.
What could be the reason for the communication loss.
My PLC node address is 11 and its a single segment communication. There are distributed I/O's in the Loop .
Configuration :
Equipment address : 11.00.00.00.00
Local Station Address is 13.
Thanks & Regards
I am trying to establish communication from Concept PLC to Vijeo Designer (version 5) via a TSXCUSBMBP in a MODBUS PLUS loop.
When I connecting my laptop to the loop , ie TSXCUSBMBP usb cable to the laptop, I am able to see the Modbus plus loop is alive. But when connecting to Magelis HMI , the Modbus plus loop is In Active.
What could be the reason for the communication loss.
My PLC node address is 11 and its a single segment communication. There are distributed I/O's in the Loop .
Configuration :
Equipment address : 11.00.00.00.00
Local Station Address is 13.
Thanks & Regards