gtsuport
Member
The CPM1-CIF01 has the "old style / large" peripheral port connector on the pigtail and the Omron pin out DB9 on the front.
This unit works with the CN220-EU cable to communicate with CPM series, CQM1 and C200HS and newer processors. It will not work with the original C200H cpu.
You can use the two cables your Omron dealer quoted, those will work for the CQM1H (original post).
You could also use the cable below from GeniusInTraining. This is a single cable, USB to mini peripheral port.
https://www.plccable.com/omron-plc-cable-usb-cs1w-cn226-cs1wcn226-usb-version/
Above will work for CQM1H.
You would need the cable below for the CPM1A to connect to the peripheral port.
https://www.plccable.com/omron-plc-cable-usb-version-of-cqm1-cif02-usb-cif02/
Or this cable to connect to the DB9 on the CIF01.
https://www.plccable.com/omron-plc-cable-usb-c200hs-cn220-eu/
Sorry, not able to help on the Logo.
Hope this helps.
This unit works with the CN220-EU cable to communicate with CPM series, CQM1 and C200HS and newer processors. It will not work with the original C200H cpu.
You can use the two cables your Omron dealer quoted, those will work for the CQM1H (original post).
You could also use the cable below from GeniusInTraining. This is a single cable, USB to mini peripheral port.
https://www.plccable.com/omron-plc-cable-usb-cs1w-cn226-cs1wcn226-usb-version/
Above will work for CQM1H.
You would need the cable below for the CPM1A to connect to the peripheral port.
https://www.plccable.com/omron-plc-cable-usb-version-of-cqm1-cif02-usb-cif02/
Or this cable to connect to the DB9 on the CIF01.
https://www.plccable.com/omron-plc-cable-usb-c200hs-cn220-eu/
Sorry, not able to help on the Logo.
Hope this helps.
Last edited: