zmanvortex
Member
I am using an AutomationDirect DL-06 with a H0-CTRIO to retrofit to a Bindicator. I will be getting pulses from a micro switch on the Bindicator at about 10 hertz. I was bench testing using a toggle switch in place of the micro switch and noticed that I was getting about 10 debounce pulses every time I flipped the switch, leading to a false pulse count.
I am going to build a simple passive RC circuit to try and filter anything over 15 hertz. This is a pretty low frequency and would like some insight. I will have a 1.4k resistor and 1000nF capacitor later today to test with.
The high speed counter card does not have any filtering capabilities.
I am going to build a simple passive RC circuit to try and filter anything over 15 hertz. This is a pretty low frequency and would like some insight. I will have a 1.4k resistor and 1000nF capacitor later today to test with.
The high speed counter card does not have any filtering capabilities.