neerajpuranik
Member
Is it possible to use cable between ML1500 & operator panel to connect PLC to laptop if RS232-DF1 cable is not available. Kindly advice.
RS232-DF1 cable help
- Thread starter neerajpuranik
- Start date
bernie_carlton
Lifetime Supporting Member + Moderator
You would have to use a "null-modem" adapter with that cable.
neerajpuranik
Member
OP
Pardon my ignorance - What is null modem?????
geniusintraining
Lifetime Supporting Member + Moderator
You may also need a gender changer
Here is a complete pinout of a null modem cable
Here is a complete pinout of a null modem cable
Similar Topics
Anyone have any experience with using a 1747-DPS2 device? Bascially, have a Micrologix 1000 where the round port is being used by the HMI (Panel...
I am having trouble with communication between my micrologix 1000 and my magelis HMIGTO5310 touchscreen i have added the allen bradley df1 driver...
Has anyone tried DF1 with the RS232 to TCP servers? RS232 to TCP WIFI servers? Curious if anyone has had any luck. I'm thinking of trying it with...
Hi,
I am trying to download a program onto the a PV550. The program was initially written for a PV300 with DF1 communications. The PV550 has...
Hi all.
I am having trouble getting a Siemens OP277 and an AB SLC504 to talk to each other via DF1.
The older panels OP25/OP27/OP270 had an...