eight_bools
Lifetime Supporting Member
Anyone have experience using serial to Ethernet converters to connect to SLC and Micrologix devices?
I am looking to build a remote access box than can ship to plants for remote access to assist with troubleshooting. I have a cellular modem with VPN and was planning on using an ANC DH+ gateway but am now looking for something that can do serial connections.
I support a number of sites, most of the equipment is connected to our companies network. I do run across equipment from time to time that is not and I am asked to connect. Typically I have to travel on site, and something like this that I could write up some instructions and ship to them would be great.
I was looking at something like this:
https://www.usconverters.com/serial-ethernet-converter-industrial
I am looking to build a remote access box than can ship to plants for remote access to assist with troubleshooting. I have a cellular modem with VPN and was planning on using an ANC DH+ gateway but am now looking for something that can do serial connections.
I support a number of sites, most of the equipment is connected to our companies network. I do run across equipment from time to time that is not and I am asked to connect. Typically I have to travel on site, and something like this that I could write up some instructions and ship to them would be great.
I was looking at something like this:
https://www.usconverters.com/serial-ethernet-converter-industrial