JorgeUlises
Member
Hello:
I´m working with a S5 135, CPU 928 B from siemens. When loading the Plc program and after setting to run mode the plc shows me a status error "ADF" That is related with I/O Addressing.
Logically I can´t see the inputs from slots 1 and 2, but the I/O modules are OK, all of them. This makes me think is the rack.
Recently I´ve change the rack for a new one, but I have the same trouble.
Hope, some one could help me with this headeache.
Thanks.
I´m working with a S5 135, CPU 928 B from siemens. When loading the Plc program and after setting to run mode the plc shows me a status error "ADF" That is related with I/O Addressing.
Logically I can´t see the inputs from slots 1 and 2, but the I/O modules are OK, all of them. This makes me think is the rack.
Recently I´ve change the rack for a new one, but I have the same trouble.
Hope, some one could help me with this headeache.
Thanks.