stayclashy80
Member
Hello friends,
So I made a S_CU and its working fine. Problem is it only goes to 999. I want to send the counter output to a register that continuously counts and goes much higher than 999. Also I need to know if the S_CU I made will start over automatically at 1000 and go back to 1 and continuously count or if I need make it count continuously.
Thanks guys
So I made a S_CU and its working fine. Problem is it only goes to 999. I want to send the counter output to a register that continuously counts and goes much higher than 999. Also I need to know if the S_CU I made will start over automatically at 1000 and go back to 1 and continuously count or if I need make it count continuously.
Thanks guys