Hello to all,
I have one wincc operator station (version 7.0) that is used for monitoring and control of the process via S7-315 PLC. This Wincc application stores data in the database and doing some simple math.
However, the problem is the lack of synchronization between the PLC and WinCC. I found that from time to time I need to open a menu in Simatic manager and to click on the option "Take time from PC/PG".
Basically I need PLC to use time from WinCC (and Wincc uses the windows clock). This would be perfectly fine.
Can anyone help me in explaining or point out to a manual how to make this synchronization?
Thank you
I have one wincc operator station (version 7.0) that is used for monitoring and control of the process via S7-315 PLC. This Wincc application stores data in the database and doing some simple math.
However, the problem is the lack of synchronization between the PLC and WinCC. I found that from time to time I need to open a menu in Simatic manager and to click on the option "Take time from PC/PG".
Basically I need PLC to use time from WinCC (and Wincc uses the windows clock). This would be perfectly fine.
Can anyone help me in explaining or point out to a manual how to make this synchronization?
Thank you