theColonel26
Lifetime Supporting Member
Ok guys I have a strange one. I just added a timer to to ML 1400 program, and it is not accumulating anything. But the OTE after the XIC TT instruction is true.......
I have done a cross reference of the Timer and it is not used any where else. further my HMI does not access any of my Timers directly so it can't be that writing in. Also the routine is called and is executing everything else just not this TON.
Side Note: the big branch around everything at the start of the rung was just to eliminate those XIOs as being the cause of the issue.
WTF?
I have a script that copies this set of logic 18 times, in to offset registers, it is doing it on every single instance of this logic. I am perplexed.
See video.
https://drive.google.com/file/d/12L5VdkQouMhH7XyyrnrR4Ez9oOvH7XWe/view?usp=sharing
I have done a cross reference of the Timer and it is not used any where else. further my HMI does not access any of my Timers directly so it can't be that writing in. Also the routine is called and is executing everything else just not this TON.
Side Note: the big branch around everything at the start of the rung was just to eliminate those XIOs as being the cause of the issue.
WTF?
I have a script that copies this set of logic 18 times, in to offset registers, it is doing it on every single instance of this logic. I am perplexed.
See video.
https://drive.google.com/file/d/12L5VdkQouMhH7XyyrnrR4Ez9oOvH7XWe/view?usp=sharing