eslamwahba Member E Join Date Apr 2015 Location alex Posts 13 Apr 19, 2015 #1 How can I use sm@rtservice I have no experience for this anybody help?
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Apr 19, 2015 #2 https://support.industry.siemens.com/tf/ww/en/posts/set-up-of-sm-rt-service/56326/?page=0&pageSize=10 I would check this tread out from Siemens. Regards, Garry http://www.accautomation.ca
https://support.industry.siemens.com/tf/ww/en/posts/set-up-of-sm-rt-service/56326/?page=0&pageSize=10 I would check this tread out from Siemens. Regards, Garry http://www.accautomation.ca
steffen_sohl Lifetime Supporting Member S Join Date May 2002 Location Roskilde, Denmark Posts 80 Apr 20, 2015 #4 TP177 does not support Sm@rtService
eslamwahba Member OP E Join Date Apr 2015 Location alex Posts 13 Apr 21, 2015 #5 steffen_sohl I have TP177B
steffen_sohl Lifetime Supporting Member S Join Date May 2002 Location Roskilde, Denmark Posts 80 Apr 21, 2015 #6 TP177B does not support Sm@rtService either
JesperMP Lifetime Supporting Member + Moderator Join Date Feb 2003 Location ᚴᚬᛒᛅᚾᚼᚬᚠᚾ Posts 16,324 Apr 21, 2015 #7 If it is a TP177B-PN/DP, then smartservice do work.
eslamwahba Member OP E Join Date Apr 2015 Location alex Posts 13 Apr 21, 2015 #8 Its a TP177B-PN/DP I want cleary steps to work with Sm@rtsevice because of i have no experience to work with this software.
Its a TP177B-PN/DP I want cleary steps to work with Sm@rtsevice because of i have no experience to work with this software.
JesperMP Lifetime Supporting Member + Moderator Join Date Feb 2003 Location ᚴᚬᛒᛅᚾᚼᚬᚠᚾ Posts 16,324 Apr 22, 2015 #9 I think the manual on Siemens support is called "WinCC Flexible options" or something like that.