Hi!
I have a E1071 from Beijer in use since 14 days.
But now it does not start the project anymore.
When i turn on the E1071, it writes: Status: Downloading...
After a short time it writes: Status: D/L timeout!
"Load project automatically on detection" in the memory card
settings is enabled, but there is no CF card or USB stick
plugged.
knows somebody this problem?
I have a E1071 from Beijer in use since 14 days.
But now it does not start the project anymore.
When i turn on the E1071, it writes: Status: Downloading...
After a short time it writes: Status: D/L timeout!
"Load project automatically on detection" in the memory card
settings is enabled, but there is no CF card or USB stick
plugged.
knows somebody this problem?
Last edited: