Hello guys,
So I uploaded the .exob, decompiled and made some changes then compiled and uploaded the project only to realize the buttons and other controls on the screen are no longer connected to the PLC.
So I uploaded the original .exob and ended up with the same results, lost connection of screen controls.
This is a live machine and any help is appreciated.
Edit: I scanned the network with wireshark and wientek is no longer looking for the PLC
Thanks
Kal
So I uploaded the .exob, decompiled and made some changes then compiled and uploaded the project only to realize the buttons and other controls on the screen are no longer connected to the PLC.
So I uploaded the original .exob and ended up with the same results, lost connection of screen controls.
This is a live machine and any help is appreciated.
Edit: I scanned the network with wireshark and wientek is no longer looking for the PLC
Thanks
Kal
Last edited: