lunenburger
Member
Just wondering if it is possible to wire in a Cynergy UF08B100 Flowmeter into an Allen Bradley 1734-IE4C.
I have tried every way I can think of and I either get 21ma or 0ma.
Here is the link to the install manual for the Cynergy flowmeter
https://www.cynergy3.com/sites/default/files/blog-documents/UF%20install%202019.pdf
And I have attached a picture of the wiring diagram for both the 1734-IE4C and flowmeter
I believe the Analog input card can't do sinking input, so I think I may have to source another card....
I have tried every way I can think of and I either get 21ma or 0ma.
Here is the link to the install manual for the Cynergy flowmeter
https://www.cynergy3.com/sites/default/files/blog-documents/UF%20install%202019.pdf
And I have attached a picture of the wiring diagram for both the 1734-IE4C and flowmeter
I believe the Analog input card can't do sinking input, so I think I may have to source another card....