Hello colleagues! I have a Total Control's Quickpanel 9" Monochrome Screen Model QPI211. I want to connect to an Allen Bradley PLC SLC 500 CPU 5/04 using DH+, in the Quick Designer project setup I have set the communication protocol AB SLC DH485, then in protocol configuration I have put the same number in both the Source ID (Screen) and the Destination ID (PLC) to avoid the error "02: FF PLC IS NOT CONECTED" I tried with several numbers but I get the error again.
By the way the screen has already been connected previously with the PLC since it has a loaded program that I could not recover, that is why I did another program but I get the error. How can I solve the problem? Thanks you all.
By the way the screen has already been connected previously with the PLC since it has a loaded program that I could not recover, that is why I did another program but I get the error. How can I solve the problem? Thanks you all.