I'm converting a Citech SCADA program to a FTView ME program and I've run into a button logic issue that i have to be over thinking.
I want to use 3 buttons to control 3 separate bits in a PLC program. If i press one button i want that bit to come on and the other two to go off. I'm having a brain **** on how to do this in FTView ME without changing the PLC program and without using macros.
I've already converted the rest of the HMI program without changing the PLC program at all, so i don't want to change it for this small issue, I'm also not real familiar with macros.
There has to be a way to do this that I'm over looking, I've converted 7 different Citech SCADA programs to FTView ME so far and this is the first time I've needed to do this for these conversions. I know there has to be an easier way that I'm over looking.
Screenshot of the buttons is attached.
I want to use 3 buttons to control 3 separate bits in a PLC program. If i press one button i want that bit to come on and the other two to go off. I'm having a brain **** on how to do this in FTView ME without changing the PLC program and without using macros.
I've already converted the rest of the HMI program without changing the PLC program at all, so i don't want to change it for this small issue, I'm also not real familiar with macros.
There has to be a way to do this that I'm over looking, I've converted 7 different Citech SCADA programs to FTView ME so far and this is the first time I've needed to do this for these conversions. I know there has to be an easier way that I'm over looking.
Screenshot of the buttons is attached.