dimas_lilik
Member
Hi. I need help.
Can I use Siemens S7 300 CPU 312 for 9 modules Digital IO and 1 Digital I module?
How?
Can I use Siemens S7 300 CPU 312 for 9 modules Digital IO and 1 Digital I module?
How?
Siemens S7 300
- Thread starter dimas_lilik
- Start date
One S7-300 row can have max 8 modules.
With expansion IM modules you can split into multiple rows of 8 modules.
S7-312 only supports 1 row, max 8 modules. Higher CPUs supports up to 4 rows for a maximum of 32 modules.
As possible solutions, consider a 314 CPU, or to switch to IM151-8 + ET200S i/o. I recommend the latter.
With expansion IM modules you can split into multiple rows of 8 modules.
S7-312 only supports 1 row, max 8 modules. Higher CPUs supports up to 4 rows for a maximum of 32 modules.
As possible solutions, consider a 314 CPU, or to switch to IM151-8 + ET200S i/o. I recommend the latter.
Last edited:
Similar Topics
Hi,
I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why?
Could...
Hello all. I have an ESA HMI that is connected to a Simatic S7-300 (CPU312). I have uploaded the program from the PLC which is written with Step7...
Hello. There is a problem with Siemens S7 300. We got a replacement PLC but it does not run the program from the MMC. The new PLC is dated 2011...
Hi to all,
Our company does not usually use Siemens PLCs, but have a press with one in it. We are trying to change the IP address in our Simatic...
G'day guys,
I am setting up a s7-300 as a test rig for the workshop and when I downloaded the PLC is not going into run mode, I keep getting a...