dploof23
Member
Hello all,
I am looking for a portable, (battery powered), 24 vdc power supply.
My situation is this....
I have a flow sensor that I would like to use as a portable diagnostic tool. I would like not to have to provide 120 vac to the unit. It requires 24 vdc at 100ma. I have a couple sensor testers here but they all use two 9 volt batteries and the output voltage is not enough. Is there a pre-canned solution for this out there or am I making my own? I did some searching and came up empty.
Thanks for any help,
Dave
I am looking for a portable, (battery powered), 24 vdc power supply.
My situation is this....
I have a flow sensor that I would like to use as a portable diagnostic tool. I would like not to have to provide 120 vac to the unit. It requires 24 vdc at 100ma. I have a couple sensor testers here but they all use two 9 volt batteries and the output voltage is not enough. Is there a pre-canned solution for this out there or am I making my own? I did some searching and came up empty.
Thanks for any help,
Dave