Contr_Conn
Member
Need some help with AD:
My friend who owns small shop wants to retrofit one of his machines with AD PLC.
He took some time already trying to select PLC without any results, so he called me today.
Unfortunately I never used AD myself so hoping you guys can give us some help with PLC selection
Why AD? that is what he wants and I am not at the point to tell him something else.
Processor with 12 PID loops, FP math
Serial port for an existing HMI (E900T)
Ethernet port (optional for now)
12 TC inputs K and J
12 Analog 4-20mA outputs to heather control relays
32 Digital Inputs 120VAC
16 Triac 1Amp outputs 120VAC
16 0.3A outputs 120VAC
1 Axis motion controller to analog servo - new Mutsu drive he has.
All software, cables, printed manuals.
Any advice appriciated
Thanks
My friend who owns small shop wants to retrofit one of his machines with AD PLC.
He took some time already trying to select PLC without any results, so he called me today.
Unfortunately I never used AD myself so hoping you guys can give us some help with PLC selection
Why AD? that is what he wants and I am not at the point to tell him something else.
Processor with 12 PID loops, FP math
Serial port for an existing HMI (E900T)
Ethernet port (optional for now)
12 TC inputs K and J
12 Analog 4-20mA outputs to heather control relays
32 Digital Inputs 120VAC
16 Triac 1Amp outputs 120VAC
16 0.3A outputs 120VAC
1 Axis motion controller to analog servo - new Mutsu drive he has.
All software, cables, printed manuals.
Any advice appriciated
Thanks
Last edited: