Dear Friends ,
Im using RSLOGIX 5000 for ladder programming and using analog output and Input Modules , How to upload the Analog input block and Analog output Block from which library and please can i get a sample programme for the application as :
From 4 to 20mA as an analog input ( Pressure transmitter ) field device i will open the valve at 50 % half open , 70 % & 100 % fully open.
Please Please Please , I dont want accurate or exact just as sample example I want to do , Analog Input module is 1769-IF8 and Analog Output Module is 1769-OF8
Thanks I hope ill get the sample
Thanks & Regards
Sam
Im using RSLOGIX 5000 for ladder programming and using analog output and Input Modules , How to upload the Analog input block and Analog output Block from which library and please can i get a sample programme for the application as :
From 4 to 20mA as an analog input ( Pressure transmitter ) field device i will open the valve at 50 % half open , 70 % & 100 % fully open.
Please Please Please , I dont want accurate or exact just as sample example I want to do , Analog Input module is 1769-IF8 and Analog Output Module is 1769-OF8
Thanks I hope ill get the sample
Thanks & Regards
Sam