ceilingwalker
Lifetime Supporting Member
Hello all, I have a Quick Pro Jr and SL5/03. I'm using Quick Design 3.7. The HMI was programmed and working fine. I need to make changes as the PLC has undergone some changes. I'm trying to view all of the panels that are in the program, currently. When I open Quick Manager and then Panels, it only displays the first panel. How do I veiw the other panels that I know are there (pressing "go to" buttons) but do not show up on the program on my laptop? Also, when I go to the "Tags" page, it lists a lot of bit addresses (eg. B3/351 and then B41:0/0) that are not described and when I go to the ladder that it is interfaced with, those bit addresses don't exist. These bit addresses are what interface the HMI with the PLC, right? I can't upload the HMI program to this site. Thank you for your help.