OkiePC
Lifetime Supporting Member
Counting and timing without counter or timers.
This one should allow a 4 scan tolerance on button press timing. I tried testing it out with CGM buttons and was able to prove it works with RSLogix500 Emulate.
I changed the CPU to a 5/05 and addresses to match the assignment too, so it will no longer run (as addressed) in RSLogix Micro Starter Lite (Free) Edition or whatever it is named this month.
The seal in branch may need to go away or be replaced with something a little different to satisfy the instructor, and the XIO "TDC" is fictitious at the moment.
"Look Ma, two hands, no timers or counters..."
This one should allow a 4 scan tolerance on button press timing. I tried testing it out with CGM buttons and was able to prove it works with RSLogix500 Emulate.
I changed the CPU to a 5/05 and addresses to match the assignment too, so it will no longer run (as addressed) in RSLogix Micro Starter Lite (Free) Edition or whatever it is named this month.
The seal in branch may need to go away or be replaced with something a little different to satisfy the instructor, and the XIO "TDC" is fictitious at the moment.
"Look Ma, two hands, no timers or counters..."
Attachments
Last edited: