Hi
we just change one drive on a Control network connected on a SLC500 and I'm not able to setup the communication. 5/04 and powerlfex70 with 20commC module
All of the other drives communicate with the SLC but the new one. I checked the network node and it's correct.
The MOD led flash green so it meens that the communication is ok but no I/O is used.
Because of that I have to use the drive in manual mode instead of automatic mode.
Any suggestion?
thanks
Martin.
we just change one drive on a Control network connected on a SLC500 and I'm not able to setup the communication. 5/04 and powerlfex70 with 20commC module
All of the other drives communicate with the SLC but the new one. I checked the network node and it's correct.
The MOD led flash green so it meens that the communication is ok but no I/O is used.
Because of that I have to use the drive in manual mode instead of automatic mode.
Any suggestion?
thanks
Martin.