Hi Rob,
Thanks for dropping by.
Actually I have a processor for one site in which the program was installed by me yesterday and WE (both of us) found out that one module IB 16 was faulty.
Now, there is the other processor which I am trying to upload with some other program for another site, which is giving me error:
"Fault Code = 0001h
Default program loaded due to NVRAM error. A corrupt CRC was detected (loss of battery power may cause this) etc.
Cannot go online or upload from DEFAULT processor (no program).
You must perform download."
And when I try to download the program, then it gives an error:
No response from processor at selected path/node!
Diagnostic Status failed: 0x4"