seeigecannon
Member
Hello. I am still fairly new to this.
I am playing around with an Indradrive HCS01 controller. I have it talking to my L71 (V33.11) just fine, but it is creating a configuration tag that is a SINT[400]. The drive itself doesn't even use the configuration (in the Connection Parameters area the configuration size is set to 0). The drive is set up as a generic Ethernet module. While Bosch does have an EDS file it doesn't seem to work (and the manual says to create it as a generic module anyway).
My concern is that this is a massive waste of RAM, and while it is not a problem at this time I would rather it stay not a problem if I need to add 10 of these drives.
I am attaching a screenshot of what I am seeing. If anybody has any ideas I would be very grateful.
I am playing around with an Indradrive HCS01 controller. I have it talking to my L71 (V33.11) just fine, but it is creating a configuration tag that is a SINT[400]. The drive itself doesn't even use the configuration (in the Connection Parameters area the configuration size is set to 0). The drive is set up as a generic Ethernet module. While Bosch does have an EDS file it doesn't seem to work (and the manual says to create it as a generic module anyway).
My concern is that this is a massive waste of RAM, and while it is not a problem at this time I would rather it stay not a problem if I need to add 10 of these drives.
I am attaching a screenshot of what I am seeing. If anybody has any ideas I would be very grateful.