robw53
Member
i am looking into intergrating 4 pieces of machinery over ethernet and just looking for some advice/tips as to anything i need to setup/configure or if its neccessary to have a managed switch.
3 mixers each having a L35E and PV+1250 each mixer is interlinked with each other
and a flour delivery system with an L35E with seperate ethernet cable's to each of the 3 mixers, at the moment it has 1xPV300, 2xVFD's and 1xFlex I/O with 3 modules all on devicenet but im swapping them shortly to ethernet and replacing the PV with a PV+1000
from the flour system i will be Producing 3 UDT's and these will be consumed 1 for each mixer and each PV+ 1250 on each mixer will be looking directly at the flour system for a handful of tags per mixer
as it stands i will not need to be producing from the mixers to the flour system but it could be something that may be needed at a later date.
3 mixers each having a L35E and PV+1250 each mixer is interlinked with each other
and a flour delivery system with an L35E with seperate ethernet cable's to each of the 3 mixers, at the moment it has 1xPV300, 2xVFD's and 1xFlex I/O with 3 modules all on devicenet but im swapping them shortly to ethernet and replacing the PV with a PV+1000
from the flour system i will be Producing 3 UDT's and these will be consumed 1 for each mixer and each PV+ 1250 on each mixer will be looking directly at the flour system for a handful of tags per mixer
as it stands i will not need to be producing from the mixers to the flour system but it could be something that may be needed at a later date.