fredjohns
Member
We have a machine that has a Micrologic 1000 in it that controls a display panel. Once of the things on the display is the machine count. The machine use to run at a maximum of 30,000 pieces a day and everything was fine. Now the speed has been increased and the machine runs between 60,000 an 70,000 pieces a day. In the micrologic program they were useing a counter to keep track of the machine counts and the diplay got its count from the ACC value of the counter. Now once it gets to around 34,000 or so, the counts start going backwards and I am assuming that is has something to do with the counter not being able to go above a certain number. Is there an easy fix if we want to count up to 60,000 to 70,000 counts now and not have it start counting backwards.
Thanks
Fred Johns
Day Timer, Inc.
Thanks
Fred Johns
Day Timer, Inc.