Hi, A while back i found a thread here detailing the setup of a 5/05 for ethernet passthrough on the rs232 port
what i have is a panelview 550, that has 2 dh485 ports, an AIC that is connected to the plc,
i have a copy of the program and need to replace the existing panelview, but i cannot access either panelview from the laptop thru the ethernet, i do not have a real serial port so i cannot hook right up to it
about 2 weeks ago i did manage to connect just fine, and download the existing program, but when i tried to connect today, its not working.
what i have is a panelview 550, that has 2 dh485 ports, an AIC that is connected to the plc,
i have a copy of the program and need to replace the existing panelview, but i cannot access either panelview from the laptop thru the ethernet, i do not have a real serial port so i cannot hook right up to it
about 2 weeks ago i did manage to connect just fine, and download the existing program, but when i tried to connect today, its not working.