phuc0072000
Member
Hj everybody , I'm a newbie
I have problem connecting to read the program from the FX1N PLC as shown below.
I use cable USB SC9 , and tested with cable Usb to Com , but both can't conect . I chose the correct COM port , and test connection successful .
I have tried this cable with another device, it can connect.
I use software GX Developer , and GX work 2 .
PLC no have password .
My computer use Win 10 OS 64Bit
If you have experience with this issue, please help me,
thank you very much.!
https://photos.app.goo.gl/wh95Y9riGHKyWGFv9
https://photos.app.goo.gl/oBgwf1BVHbmVZFhJ8
I have problem connecting to read the program from the FX1N PLC as shown below.
I use cable USB SC9 , and tested with cable Usb to Com , but both can't conect . I chose the correct COM port , and test connection successful .
I have tried this cable with another device, it can connect.
I use software GX Developer , and GX work 2 .
PLC no have password .
My computer use Win 10 OS 64Bit
If you have experience with this issue, please help me,
thank you very much.!
https://photos.app.goo.gl/wh95Y9riGHKyWGFv9
https://photos.app.goo.gl/oBgwf1BVHbmVZFhJ8