Hello to all, I have an pc running an aplication with RSview32 working with DH+, now I need to move the PC 200mts and there is not DH+ net.
I foun an acces point, so i checked with RSlinx and found the PLC that i was working with rsview32 "CAM00553"
So i decide to work with RSView32 thru the Lan net.
My problem is to configurate the node in RSView32
The image "CAM00555" there is the node configuration
the number 2 to six, is the original configuration. and the 1 is the item that i try to confiurate to reach the "60, PLC-5/60B EMPAQUE" thru ethernet (192.100.10.13)
Any idea what should be the address to reach the "60, PLC-5/60B EMPAQUE" in the "Station" the "Node" in RSView32.
I try to configurate the OPC Server (RSlinx Professional) but I can't do it.
Any idea I'll be pareciate, thanks in advance.
I foun an acces point, so i checked with RSlinx and found the PLC that i was working with rsview32 "CAM00553"
So i decide to work with RSView32 thru the Lan net.
My problem is to configurate the node in RSView32
The image "CAM00555" there is the node configuration
the number 2 to six, is the original configuration. and the 1 is the item that i try to confiurate to reach the "60, PLC-5/60B EMPAQUE" thru ethernet (192.100.10.13)
Any idea what should be the address to reach the "60, PLC-5/60B EMPAQUE" in the "Station" the "Node" in RSView32.
I try to configurate the OPC Server (RSlinx Professional) but I can't do it.
Any idea I'll be pareciate, thanks in advance.