I know nothing about simaticnet OPC server. I do know Kepware. I would only ever scale raw to engineering in the PLC, but it is possible to scale in Kepware.
This is the iFix config for this tag
CPU;READ;DB23;REAL130;S7:[OPC_1]
I'm using OPC Scout V10 and the properties for DB23;REAL130 don't show any scaling information. Is it even possible? Am I even looking in the right place?
The big picture, I'm trying to find out why the value from Kepware OPC is showing different than iFix. Two separate OPC servers, one source (S7 PLC), two different values. No scaling in iFix or Kepware, so I'm looking at the simatic config.
Hope this isn't confusing, and thanks in advance for your pointers!
This is the iFix config for this tag
CPU;READ;DB23;REAL130;S7:[OPC_1]
I'm using OPC Scout V10 and the properties for DB23;REAL130 don't show any scaling information. Is it even possible? Am I even looking in the right place?
The big picture, I'm trying to find out why the value from Kepware OPC is showing different than iFix. Two separate OPC servers, one source (S7 PLC), two different values. No scaling in iFix or Kepware, so I'm looking at the simatic config.
Hope this isn't confusing, and thanks in advance for your pointers!