[email protected]
Member
Hi, What can I correct write syntex in Step7:
If MW0>110 Then
MW2:= 110;
Else
MW2:=MW0
End If
thanks
BarP
If MW0>110 Then
MW2:= 110;
Else
MW2:=MW0
End If
thanks
BarP
Syntax IF_THEN in Step 7
- Thread starter [email protected]
- Start date
L D[AR2P#0.0]
Lifetime Supporting Member
Code:
if: L MW 0
L 110
>I
JCN else
then: L 110
T MW 2
JU enif
else: L MW 0
T MW 2
enif: NOP 0[email protected]
Member
OP
Thank, it is very easy..
Similar Topics
Does anyone know where I can find a syntax description of Siemens Step 5?
Best regards,
Henry
Hi all.
I'm building my first Grafcet using Logix, but I started from another project.
From what we usually do with other PLC's, I was expecting...
Hi.
I'm struggling over some basic stuff here.
41001 I is a 16 bits integer that I'm able to read with InTouch.
What I need to do is to read...
Hello,
Im new to Studio 5000 View Designer and i try to make a popup reusable screen.
So i create a user-defined screen with 2...
When using the Siemens S7-1200 Symbolic Addressing driver, there is no Offset Tag or Index Option
I wish to be able to read an array tag for...