Hi folks,
I am using Vijeo Designer V6.0 to send ASCII string commands to printer.
The printer is an inkjet printer that prints on boxes.
I have to send a string command like this
"SEL|filename|fieldname1|fieldname2|"<cr>
the printer can accept ASCII commands thruogh Serial RS 232 or ethernet TCP/IP.
I can communicate with the printer using a vb code that i wrote to send and recieve commands and acknowledgement.
But the HMI can only send ASCII bytes through serial and modbus tCP/ip. how do i get these 2 to communicate?
Any help would be apreciated
I am using Vijeo Designer V6.0 to send ASCII string commands to printer.
The printer is an inkjet printer that prints on boxes.
I have to send a string command like this
"SEL|filename|fieldname1|fieldname2|"<cr>
the printer can accept ASCII commands thruogh Serial RS 232 or ethernet TCP/IP.
I can communicate with the printer using a vb code that i wrote to send and recieve commands and acknowledgement.
But the HMI can only send ASCII bytes through serial and modbus tCP/ip. how do i get these 2 to communicate?
Any help would be apreciated