Siemens S7 300 valid Addresses

chikuni

Member
C
Join Date
May 2009
Location
Windhoek
Posts
12
Can some one refer me to a manual with all the valid addresses for Step 7 S 300 blocks and variables, I know now I0.1 and Q0.2 etc and also timers e.g. T2 T5 but I still want to know about designations and addresses for other blocks such as counters, etc.

I am sure some one will come up with the reference!

echi
 

Similar Topics

X
Valid Siemens S300 safety plc use ?
My boss insists that we use a Siemans 300 series Safety plc for the application of counting and timing pulses at 15 hz 50ms width using 317F-2 CPU...
Replies
4
Views
4,560
freddofrog
F
ceilingwalker
ESA HMI and Siemens S7-300 question
Hello all. I have an ESA HMI that is connected to a Simatic S7-300 (CPU312). I have uploaded the program from the PLC which is written with Step7...
Replies
6
Views
1,444
ceilingwalker
ceilingwalker
M
Siemens S7 300 PLC replacement issue
Hello. There is a problem with Siemens S7 300. We got a replacement PLC but it does not run the program from the MMC. The new PLC is dated 2011...
Replies
3
Views
689
Rob...
R
M
Help with IP address on a Siemens Simatic S7300
Hi to all, Our company does not usually use Siemens PLCs, but have a press with one in it. We are trying to change the IP address in our Simatic...
Replies
2
Views
1,066
Maintenance Man
M
A
Siemens S7-300 not going into run mode
G'day guys, I am setting up a s7-300 as a test rig for the workshop and when I downloaded the PLC is not going into run mode, I keep getting a...
2 3
Replies
35
Views
5,218
advanced.eic
A
Back
Top Bottom