Daye.04
Member
Hey all.
I don't like to do this, but we've got like a huge thing going on here, and they'd like for me to get it over with as soon as possible.
Now. My question is as follows.
We've got a Saia PCD3 PLC up in our cabinet. Through - If I'm not mistaken - an RS232 or similar, a profibus cable goes to an Eaton EU5C-SWD-DP Gateway Profibus DP. And connected to this gateway is ten Eaton PKE-SWD-32 modules on relays to motors.
Now. My question is how I can find what address the different flags (inside the program of the Saia PLC) refers to regarding the different modules. And secondly everything else that could be good to know regarding profibus. Any help what so ever is greatly appreciated - thank you very much =D
I don't like to do this, but we've got like a huge thing going on here, and they'd like for me to get it over with as soon as possible.
Now. My question is as follows.
We've got a Saia PCD3 PLC up in our cabinet. Through - If I'm not mistaken - an RS232 or similar, a profibus cable goes to an Eaton EU5C-SWD-DP Gateway Profibus DP. And connected to this gateway is ten Eaton PKE-SWD-32 modules on relays to motors.
Now. My question is how I can find what address the different flags (inside the program of the Saia PLC) refers to regarding the different modules. And secondly everything else that could be good to know regarding profibus. Any help what so ever is greatly appreciated - thank you very much =D