kchap
Member
hi everyone. i have 1746-hsce2 card (class 4) that i cannot get initialized. it returns a programming error each time the counter config block is sent. i've gone over my logic and the data values in the block over and over again, but i have not been able to figure out what is going wrong. i'm attaching a screenshot of the module setup and counter config data blocks.
aside from an error in the block or if a counter is enabled when the block is sent, can anyone suggest why this may be happening?
thanks.
aside from an error in the block or if a counter is enabled when the block is sent, can anyone suggest why this may be happening?
thanks.