Hello everyone!
I'm doing a project using AB 1769 CompactLogix L32E connects with a Powerflex 700S inverter through DeviceNet. After using 1769 -SND Scanner Module to configure the address between the PLC and the inverter, I noticed that there is a Dword: Local:1:I.Fault, where Local:1:I is the place to transfer data between 1769 CompactLogix L32E and Powerflex 700S.
Is the Dword: Local:1:I.Fault contains fault codes from the inverter? If yes, where can I find the fault codes ?
I have tried to search through the Internet and AB documents but they don't tell anything about my problem.
Thanks for any help! Sorry for my lack of English
I'm doing a project using AB 1769 CompactLogix L32E connects with a Powerflex 700S inverter through DeviceNet. After using 1769 -SND Scanner Module to configure the address between the PLC and the inverter, I noticed that there is a Dword: Local:1:I.Fault, where Local:1:I is the place to transfer data between 1769 CompactLogix L32E and Powerflex 700S.
Is the Dword: Local:1:I.Fault contains fault codes from the inverter? If yes, where can I find the fault codes ?
I have tried to search through the Internet and AB documents but they don't tell anything about my problem.
Thanks for any help! Sorry for my lack of English