netostp
Member
Hello everyone,
I triyng to link a Power Module eMB-60R from Robot Adept Viper s650 to CompactLogix, version 19.11
I followed exactly the steps according to the manual Adept ePLC User Guide for RSLogix 5000. However, the module does not communicate with the PLC.
The module appears on the RSLinx Classic network, with the correct IP. But after I add the Generic Ethernet module in the PLC, it only fails "Module Fault Code 16#0118 Module Configuration Reject: Format Error"
As I mentioned, I did the configuration exactly as the User Guide asks.
Comm Format Data - SINT
Input 1 188
Output 2 156
Configuration 3 0
I attach the user guides from Adept.
Can someone help me?
Thanks in advance !
I triyng to link a Power Module eMB-60R from Robot Adept Viper s650 to CompactLogix, version 19.11
I followed exactly the steps according to the manual Adept ePLC User Guide for RSLogix 5000. However, the module does not communicate with the PLC.
The module appears on the RSLinx Classic network, with the correct IP. But after I add the Generic Ethernet module in the PLC, it only fails "Module Fault Code 16#0118 Module Configuration Reject: Format Error"
As I mentioned, I did the configuration exactly as the User Guide asks.
Comm Format Data - SINT
Input 1 188
Output 2 156
Configuration 3 0
I attach the user guides from Adept.
Can someone help me?
Thanks in advance !